HowToTechh is reader-supported. As an Amazon Associate I earn from qualifying purchases.

How to Sync Xfinity Remote to TV?

We understand how frustrating it is to lose our TV remote. It can be so frustrating to have to adjust the settings all over again. And most people don’t do well when it comes to programming remote control. However, in contrast with most remotes, the Xfinity remote is unique.

Using the online remote code lookup online tool, it is very easy to pair them to your TV. Even users with minimal knowledge of remotes can perform this without any help from a professional. So, let’s check out how to sync the Xfinity remote to tv.

How to Sync Xfinity Remote to Tv?

With Xfinity Remote, you can integrate your television, any receiver, or other audio equipment with your TV.

Pair your Remote with the Xfinity Tv

Select the Voice Remote from the Remote Code Lookup option. Once you click Continue, you will be guided through the steps to pair the remote. You may also be able to find the code in your remote’s set-up button if you cannot find it through the lookup tool. Here are the steps you need to take:

If a Setup button is present then:

  1. Switch on the television.
  2. You need to hold the Setup button till the light on the remote turns to green color.
  3. Put 9-9-1 in the box. Two green flashes will be seen now.
  4. Press CH multiple times to turn off the TV.
  5. To lock the code, press Setup after the TV turns off.
  6. Use the remote control to switch the TV on. If the remote has been successfully paired then it will be able to turn on the television.

It has the number of buttons, but no Setup button then:

  1. Switch on the television.
  2. The buttons for Xfinity and Mute should be pressed together and held for about 5 seconds and the light will turn green.
  3. Enter the first five-digit manufacturer’s code.
  4. Two green blinks on the remote indicate an accurate code.
  5. A remote with a blinking red light and green light means that it has the wrong code.
  6. Press the Power button on the remote when you are facing it towards the TV.
  7. Turn the TV back on if it has turned off and checked that the TV has paired with the remote.
  8. Try a different code if it doesn’t work.

Without a button for setup and without number buttons then:

  1. The TV box and your receiver should be on.
  2. Remove the pull tab which you will find at the back of the remote to activate it.
  3. Press the Voice button on the remote when aiming the remote at the receiver.
  4. To finish the setup, follow the directions on your TV’s screen.
  5. The Microphone button will appear when you choose the Voice option. If you already have the remote programmed for voice, then you just need to select the TV button. Then tell the remote to program.
  6. In the Remote Settings menu, you will also find instructions on how to program the remote.

Perform a factory reset if you are still experiencing issues:

In order to turn the status light on the remote control on, press the Info button and the Home button simultaneously. Five seconds is all it takes.

Your remote can be programmed to perform a factory reset by pressing the Power, Last, and Volume Down buttons. 

The remote can be paired again after this step has been completed.

How to Pair Voice Remote with the Xfinity Box

Focus the Voice Remote on the receiver or streamer. Now simply use the voice button and say program remote to the remote. Now, you will find instructions on-screen. A picture of the remote may appear as you proceed through the guidelines.

These steps can also be used:

  1. Select A from the remote.
  2. Now select the Remote Setup option.
  3. A question will ask you, Would you like to control the TV from your remote?. Check the Yes box.
  4. An alert will appear when the remote has been paired with voice control. 
  5. Afterward, you will be asked, Want to manage your TV using your remote control?” Check the Yes box again.
  6. Using the letters and numbers on screen, enter the name of your TV. After that, click OK.
  7. The remote should now be ready for pairing. Choose OK.
  8. Check your TV volume to make sure the programming and pairing had worked.
  9. If the volume of the remote can be controlled, select the worked option.
  10. Choose It Doesn’t Work if the remote isn’t working, and then try again.

Using the Voice Remote, you can control your TV and audio equipment by setting up the power, volume, and input control on-screen.

How to Program Xfinity XR11 Remote for TV

These steps will help you pair your XR11 remote with the TV:

  1. Switch on the television.
  2. Connect the Xfinity TV Box to the TV input.
  3. You need to hold the Setup button till the light on the remote turns to green color.
  4. A code appears on the screen as a three-digit code. Enter it.
  5. Now a connection has been established between your TV and XR11.

How to Program Xfinity XR15 Remote for TV

These steps will help you pair your XR15 remote with the TV:

  1. Switch the television on.
  2. Connect the Xfinity TV Box to the TV input.
  3. The buttons for Xfinity and LED should be pressed together and held for about 5 seconds and the light will turn green.
  4. Enter the first five-digit manufacturer’s code.
  5. Now a connection has been established between your TV and XR11.

Now using the Voice Remote, you can control your TV and audio equipment by setting up the power, volume, and input control on-screen.

How to Program Xfinity X1 Remote for TV

Remotes for both TVs and audio devices can be programmed for the X1. Xfinity has a remote code lookup tool on its official website, which you can access by going to Xfinity’s website. 

Press continue to find your TV’s unique code once you’ve chosen the model of the remote you have.

  1. The LED button will turn green when you hold the setup button. 
  2. Now, the remote is in setup mode. 
  3. The buttons for Xfinity and LED should be pressed together and held for about 5 seconds and the light will turn green.
  4. Enter the code which you found on the website.
  5. Two green blinks on the remote indicate an accurate code.
  6. A remote with a blinking red light and green light means that it has the wrong code.
  7. Now a connection has been established between your TV and XR11.

Now using the Voice Remote, you can control your TV and audio equipment by setting up the power, volume, and input control on-screen.

How to Remove the Paired Remote

The remote control should be removed as follows:

  1. The buttons for Setup and LED should be pressed together and held for about 5 seconds and the light will turn green.
  2. Put in 9-8-6 as the code.

Now, the green light will twinkle two times to indicate that the remote has been disconnected otherwise try resetting the remote.

How to Setup Xfinity Remote App

You can use the Xfinity TV Remote application on your smartphone like a traditional remote once you download it. Customers of X1 will be able to use Voice Remote as well. Follow These Steps:

  1. Xfinity TV Remote application can be downloaded from the App Store and play store.
  2. Xfinity TV Remote can be accessed via this app. Go to the Get Started page.
  3. You will need your Xfinity ID and password to sign in.
  4. Select your preferred TV box in the upper left corner of your Apple device, after you have logged in.
  5. The default TV box can be selected in Settings. Turn on both your TV and your TV Box before doing that. 
  6. On the app, you will see information about your TV boxes. 
  7. Syncing the name on Xfinity TV Remote with the receiver name can be done by clicking test in the application.
  8. Enter a name for each of the receivers that you will remember in order to control your TVs afterward,
  9. It is a good idea to follow the same steps for each receiver you have in your home.
  10. The DVR Manager feature will be enabled on your account if you have a compatible DVR.

Control Other Receivers from the Xfinity Remote App

By using the Xfinity TV Remote app, you can operate any TV Box in your house that is compatible. Choose the receiver you want to control:

Apple Devices

  1. On the left side of the app, choose any of the receivers.
  2. Using the Xfinity TV Remote application, you can access all of the compatible receivers.
  3. To control any receiver, simply click on its name.

Android Devices

  1. The receiver’s name can be found in the settings.
  2. Your current receiver’s name will appear. By tapping on the Xfinity TV Remote app, you’ll see all of the receivers that are compatible with the application.
  3. To control any receiver, simply click on its name.

Final Words

Making sure your Xfinity remote is being programmed properly is a quick and easy process with the remote code lookup online tool. You can find the remote code for any of your Televisions and use it to pair your remote.

However, the remote codes of TVs manufactured by different manufacturers are important to note. As such, if one code is not working you do not need to hassle. Changing the code is always an option. 

You may have encountered a problem when attempting to configure the codes if none of them worked for you. Before you can reconfigure your remote, you must first perform a complete factory reset first. This was all about how to sync Xfinity remote to tv. You will be able to sync most of the remotes with the methods mentioned above.



Leave a Comment